The JK 2″ display is a companion display to the JK BMS. It has a two inch screen that displays the battery SOC, current, battery voltage, and error codes.
This 2″ display also has a button to activate/deactivate the BMS.
It comes with a 3 meter cord, so you can place it anywhere you can easily view it.
It works with the full range of JK BMS models.
The other end of the cable plugs into the display port of the BMS, usually P6.
Appearance
The JK 2″ display has two appearances, as shown below.
Type 1 is suitable for battery pack housing, desktop, wall-mounted.
Type 2 is suitable for e-bike, motorcycle.
Display content
There are 5 display areas on the screen.
Area 1: Error code
Error codes are indexed as follows:
Area 2: Error warning symbol
When this symbol is displayed, it means that the BMS has detected a fault.
Area 3: Battery SOC
Area 4: Current
When the “-” on the left is displayed, it means that the current displayed is the discharge current.” When the “-” symbol is not displayed, it means that the current is the charging current.
Area 5: Battery Pack Voltage
Displays the total voltage of the battery pack in real time.
Activate/deactivate BMS
Press the key to activate/deactivate the BMS
When the BMS is off, a short press on the 2″ display button activates the BMS.
When the BMS is active, press and hold the button for 5 seconds to deactivate the BMS.
If you need your battery pack to have a small screen to view the operating status of your battery pack at all times, then the JK 2″ display is the best choice.
Energiepanda can currently deliver JK BMS quickly to customers in North America, Europe, Australia, Asia and South Africa
JK PB Series BMS Firmware Update & Upgrade Guide
JK-PB Series BMS Firmware Update. Fix issues and improve communication with inverter. Download the l…
MEAN WELL SBP-001 Intelligent Battery Charging Programmer Datasheet Download
MEAN WELL SBP-001 programmer lets you customize charging curves (CC/CV/FV/TC) for NPB-450/750/1200/1…
MEAN WELL NPB-1700 Smart Battery Charger Datasheet Download
MEAN WELL NPB-1700: 1700W high-power smart charger with auto voltage detection, ultra-wide 10.5–80V …
MEAN WELL NPB-1200 Smart Battery Charger Datasheet Download
MEAN WELL NPB-1200: 1200W ultra-compact smart charger with auto voltage detection, 10.5–80V ultra-wi…
MEAN WELL NPB-750 Smart Battery Charger Datasheet Download
MEAN WELL NPB-750: 750W ultra-compact smart charger with auto voltage detection, 10.5–80V ultra-wide…
MEAN WELL NPB-450 Smart Battery Charger Datasheet Download
MEAN WELL NPB-450: 450W ultra-compact smart charger with auto voltage detection, ultra-wide 10.5–100…